Sealed Lead Acid Batteries
Axyl batteries range from 7Ah to 250Ah and have a design life of 10 years when maintained at an ambient temperature between 20 and 25 degrees. They are valve-regulated with AGM technology.
These batteries are tested and are UL-listed.
Key Features:
The sealed valve is regulated and sealed with special compound epoxy using pressure-controlled vent valves.
Starved electrolyte design -the acid solution is absorbed in separators.
High-Compression Absorbent Glass Mat (AGM) technology.
A recombination reaction is used to prevent the escape of hydrogen and oxygen gases.
Spill-proof / leak-proof -can be operated in any position. However, upside-down installation is not recommended.
Maintenance-free, no water adding required. But connections must be retorqued, and the batteries should
be cleaned periodically.
Deep discharge protection.
Plate grids are made of lead-calcium alloy and are free of antimony.
No corrosion.
Installs vertically or horizontally.
Low gassing (unless overcharged).
The sealed valve is regulated and sealed with special compound epoxy using pressure-controlled vent valves.
Starved electrolyte design -the acid solution is absorbed in separators.
High-Compression Absorbent Glass Mat (AGM) technology.
A recombination reaction is used to prevent the escape of hydrogen and oxygen gases.
Spill-proof / leak-proof -can be operated in any position. However, upside-down installation is not recommended.
Maintenance-free, no water adding required. But connections must be retorqued, and the batteries should
be cleaned periodically.
Deep discharge protection.
Plate grids are made of lead-calcium alloy and are free of antimony.
No corrosion.
Installs vertically or horizontally.
Low gassing (unless overcharged).